Aanbieding!

Veel gekozen | 40001430 IWIS Roller chains IWIS

Oorspronkelijke prijs was: € 881,26.Huidige prijs is: € 370,13.

Verzending Gratis verzending vanaf € 59,00 Voor bestellingen vanaf dit bedrag
Afrekenen Veilig afrekenen SSL beveiligde betaalpagina
BETAALMETHODEN Betaalmethoden
SKU: SKEC4E018CQ Categorie:

Beschrijving

40001430 IWIS Roller chains

Specificaties

  • Merk IWIS
  • Artikelnummer 40001430
  • Spruit Artikelnummer 10000TR2819
  • Kettingsontwerp Triplex
  • Kettingsmering ip2
  • Corrosiebestendig Nee
  • Rechte zijplaten Nee
  • Minimale breekbelasting volgens ISO (kN) 530
  • Gewicht (kg/m) 28
  • Materiaal Steel
  • Steek (inch) 1.75
  • Steek (mm) 44.45
  • Maximale rollerdikte (D1) (mm) 27.94
  • Breedte tussen binnenplaten (mm) 30.95
  • Maximale pennendiameter (D2) (mm) 15.9
  • Maximale hoogte binnenplaat (H2) (mm) 37
  • Minimale breekbelasting leverancier (kN) 750
  • Dwarssteek (Pt) (mm) 59.56
  • Onderhoudsvrij Nee
  • ISO-standaardmaat 28B
  • ISO-standaard ISO 606 BS
  • Lageroppervlakte (cm²) 22.05
  • Omschrijving (EN) JWIS Roller chains are characterised by an above-average service life due to excellent wear resistance, high consistency, matchless precision and a considerably higher breaking strength and fatigue strength than required by ISO standard. All iwis chains are pre-stretched and are provided with a highly efficient initial lubrication.
    Highlights:
    • Only high-quality heat-treated and case-hardened steel is used with stringent specifications for materials analysis, tolerances and surface quality
    • Each chain part is manufactured a million times daily to the same precision and is monitored using SPC (statistical process control)
    • All chain parts are heat-treated, in some cases using special processes to optimize quality characteristics
    • Modern production technologies ensure consistent geometry and superior surface quality
    • Chains are checked for dimensional accuracy, length tolerance and flexibility, plus for the press fit joins on pins, outer plates and bush, and inner plate
    • Our high quality assurance standards comply with the requirements of ISO 9001:2006
    • For special applications: surface coatings, special lubricants, special materials (e.g. corrosion-resistant)
  • Acc. to ISO 606 (kN) 530
  • Acc. to ANSI (kN) 530
  • Merk IWIS
  • Gewicht (kg/m) 28
  • Materiaal Steel
  • Steek (inch) 1.75
  • Steek (mm) 44.45